Infinera TAM-2-10GT, WOTRA29LAA, 800-0201-001 TAM, 2-port 10GT

Description

Infinera TAM-2-10GT
Used, tested and fully functional. 90 day warranty.
Functional Description
The Tributary Adapter Module 10GT, referred to as TAM-2-10GT, provides Layer 1 Optical Private Network (OPN) services. The TAM-2-10GT receives 10G DTF electrical signals and converts the 10G DTF to an optical signal for transmission across a fiber to another TAM-2-10GT providing Layer 1 OPN services.
The Layer 1 OPN is implemented via the TAM-2-10GT, which provides digital wrapper transparency between two networks. A TAM-2-10GT must be installed at the ingress and egress points of the end-customer's network. The Layer 1 OPN allows a customer's network to have data plane isolation from other customers' networks, and allows the customer to manage their network and provision circuits using their assigned resources. The Layer 1 OPN can terminate 10Gbps, 2.5Gbps, 1GbE, 622Mbps, and/or 155Mbps services.
Support is provided for GMPLS end-to-end service provisioning using L1 OPN Out of Band signaling. SNCs are supported for 10G routes as well as 2.5G (and lower rate) routes. There is no direct GMPLS access between the provider's network and the end-customer's network. The end-customer's nodes do not receive routing information from the other remote end-customer's nodes, nor from the provider's network. For more information regarding Layer 1 OPN services, refer to the Infinera DTN and DTN-X System Description Guide.
The TAM-2-10GT can be arbitrarily equipped in any of the sub-slots located on the line module and/or TEM.
Note: Unless specifically noted otherwise, all references to the “line module” will refer to either the DLM, XLM, ADLM, AXLM, and/or SLM interchangeably. All references to the “LM-80” will refer to the ADLM-80, AXLM-80, and/or SLM-80 interchangeably.
Note: The TAM-2-10GT is not supported on the DLM-n-C1-A.
The TAM-2-10GT supports the following client interface:
- 10G DTF (with a line rate of 11.1Gbps)