-40%

Cisco ASR1000-RP1 ASR Router Processor Card

$ 44.88

Availability: 20 in stock
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Brand: Cisco
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days
  • MPN: ["Does not apply"]
  • Condition: Tested and refurbished here in our facility by experienced Cisco technicians. Minor cosmetic defects may still exist but do not effect functionality.

    Description

    ASR1000-RP1 Overview Cisco ASR1000-RP1 is the Cisco ASR 1000 RP1 Processor, designed for ASR1004 and ASR1006. Quick Spec Model ASR1000-RP1 Chassis support ASR1004 ASR1006 Cisco IOS XE operating system 32 bit CPU General-purpose CPU based on 1.5-GHz processor Memory 4 GB Built-in eUSB/eMMC bootflash 1 GB (8 GB on ASR 1002) Storage 40 GB HDD and external USB
    Cisco ASR1000-RP1 ASR Router Processor Card
    Cisco ASR1000-RP1 ASR Router Processor Card
    Click images to enlarge
    Description
    ASR1000-RP1 Overview Cisco ASR1000-RP1 is the Cisco ASR 1000 RP1 Processor, designed for ASR1004 and ASR1006. Quick Spec Model ASR1000-RP1 Chassis support ASR1004 ASR1006 Cisco IOS XE operating system 32 bit CPU General-purpose CPU based on 1.5-GHz processor Memory 4 GB Built-in eUSB/eMMC bootflash 1 GB (8 GB on ASR 1002) Storage 40 GB HDD and external USB
    ASR1000-RP1
    Specification
    ASR1000-RP1 Specification
    Chassis support
    Cisco ASR 1004 and ASR 1006 chassis
    (Note: The Cisco ASR 1002 chassis comes with the Cisco ASR 1000 Series RP1 built into the chassis.)
    (Note: Cisco ASR 1001, ASR 1001-X, and ASR 1002-X (part numbers ASR1001, ASR1001-X, ASR1002-X) have an integrated Route Processor built in to the chassis that is not upgradable)
    Software compatibility
    Cisco IOS XE Operating System, which is based on Cisco IOS Software Release 12.2SR
    (Please consult your Cisco account representative for additional details.)
    Software protocols
    Refer to Cisco IOS Software 12.2SR protocol support
    Connectivity
    ●  Console port (RJ-45 connector)
    ●  Auxiliary port (RJ-45 connector)
    ●  10/100/1000 Ethernet port (RJ-45 connector)
    ●  Two RJ-48 connectors for BITS input clocks
    Memory options
    ●  Two 1-GB Double Data Rate 2 (DDR2) mini-DIMMs
    ●  Two 2-GB DDR2 mini-DIMMs
    ●  Upgradable memory from 2-GB to 4-GB DRAM
    Storage options
    ●  40-GB HDD (RP1 only)
    ●  1-GB USB Compact Flash memory
    Performance
    ●  Scalability up to 1,000,000 IPv4 routes or 500,000 IPv6 routes
    ●  BGP RR Scalability up to 5,000,000 IPv4 routes or 3,000,000 IPv6 routes
    Reliability and availability
    ●  1 + 1 redundancy in dual-route-processor configuration
    ●  Support for online insertion and removal (OIR)
    ●  Support for NSF and Stateful Switchover (SSO)
    ●  Support for ISSU
    MIBs
    ●  RFC 2737 compliant
    Network management
    ●  Telnet and Secure Shell (SSH) Protocol (command-line interface [CLI])
    ●  Console port (through the CLI)
    ●  Simple Network Management Protocol (SNMP)
    ●  RFC 2665
    LEDs
    ●  PWR - Power
    Green - All power rails are within specifications
    ●  STAT - Status
    Green - Cisco IOS Software has booted
    Yellow - BootROM has successfully loaded
    Red - System failure or during boot process
    ●  ACTV- Active
    Green - Active route processor
    ●  STBY - Standby
    Yellow - Standby route processor
    ●  CRIT - Critical
    Red - Critical alarm or during boot process
    ●  MAJ - Major
    Red - Major alarm
    ●  MIN - Minor
    Amber - Minor alarm
    ●  LINK - Management Ethernet link status
    Solid green - Link with no activity
    FLASH green - Link with activity
    Off - No link
    ●  DISK0 - Internal Compact Flash
    FLASH Green - Activity indicator
    Off - No activity
    ●  DISK1 - External Compact Flash
    FLASH green - Activity indicator
    Off - No activity
    ●  DISK2 - Internal HDD
    FLASH green - Activity indicator
    Off - No activity
    ●  CARRIER - BITS interface
    Off - Out of service
    Green - In frame and in service
    Amber - Fault or loop condition
    Physical dimensions
    (H x W x D)
    0.92 x 16.7 x 14.19 in. (0.02 x 0.428 x 0.36m)
    Approvals and compliance
    Safety
    ●  UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment
    ●  AS/NZS 60950-1
    ●  IEC/EN 60950-1 Information technology equipment
    ●  73/23/EEC
    Electromagnetic Emissions Certification
    ●  AS/NZ 3548: 1995 (including AMD I + II) Class B
    ●  EN55022: 1998 Class B
    ●  CISPR 22: 1997
    ●  EN55022: 1994 (including AMD I + II)
    ●  47 CFR Part 15: 2000 (FCC) Class B
    ●  VCCI V-3/01.4 Class 2
    ●  CNS-13438: 1997 Class B
    ●  GR1089: 1997 (including Rev. 1: 1999)
    Immunity
    ●  EN300386: 2000-TNE EMC requirements; product family standard; high priority of service; central office and noncentral office locations
    ●  EN50082-1: 1992/1997
    ●  EN50082-2: 1995-Generic Immunity Standard, Heavy
    Industrial
    ●  CISPR24: 1997
    ●  EN55024: 1998-Generic ITE immunity standard
    ●  EN61000-4-2: 1995 + AMD I + II ESD, Level 4/8 kV contact, 15 kV air
    ●  IEC-1000-4-3: 1995 + AMD 1-Radiated Immunity, 10 V/m
    ●  IEC-1000-4-4: 1995-Electrical Fast Transients, Level 4/4 kV/B
    ●  IEC-1000-4-5: 1995 + AMD 1-DC Surge-Class 3; AC Surge-Class 4
    ●  EN61000-4-6: 1996 + AMD 1-RF conducted immunity, 10 Vrms
    ●  EN61000-4-11: 1995-Voltage Dips and Sags
    ●  ETS300 132-2: 1996 + corrigendum, December 1996
    ●  GR1089:1997 (including Rev1: 1999)
    Network Equipment Building Standards
    The module meets the following Networking Equipment Building Standards (NEBS):
    ●  GR-1089-CORE
    ●  GR-63-CORE
    European Telecommunication Standards Institute (ETSI)
    ●  ETSI 300 386-1 - Levels for equipment with a "high priority of service" that is installed in "locations other than telecommunication centers"
    ●  ETSI 300 386-2:1997 - Levels for equipment with a "high priority of service" that is installed in "locations other than telecommunication centers"
    ●  ETSI 300 132-2: December 1994 - Power supply interfaces at the input to telecommunications equipment Sections 4.8 and 4.9
    Environmental
    ●  Storage temperature: -38 to 150°F (-40 to 70°C)
    ●  Operating temperature, nominal: 41 to 104°F (5 to 40°C)
    ●  Operating temperature, short-term: 23 to 131°F (-5 to 55°C)
    ●  Storage relative humidity: 5 to 95% relative humidity (RH)
    ●  Operating humidity, nominal: 5 to 85% RH
    ●  Operating humidity, short-term: 5 to 90% RH
    ●  Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)
    Payment
    We accept PayPal
    Shipping
    We use FedEx or UPS, contact us for other options
    Get images that
    make Supersized seem small.
    Showcase your items with Auctiva's
    Listing Templates!
    THE simple solution for eBay sellers.