ALI Certified APlusLift Falcon TR-10CX 166" Tall 10000LB Over Head Car Lift

Description

ALI CERTIFIED Overhead Car Lift! Two post lift with Gold Label! Overall Height 166" with Height Extensions! Mercury Limit Switch! Three variable Drive Through 88 1/8", 94 1/16", 100"! 24 Months Parts Warranty!
Triple telescoping arm design!
ALI Certified Covers the Structural Integrity, Proper Control Function and even overloading the lift beyond its rated capacity.
6'6" Lift Height Maximum with Truck Adapters
Flawless Manual Single Point Lock release system
Durable Powder Coated Finish on Steel
All Robot Welded Structure
Dual Direct Drive Hydraulic Cylinders
Oversized 57" Tall Carriages
ALI (Automotive Lift Institute) governs the safety standards for automotive lifts in the U.S. ALI Certified lifts must all pass the exact same testing, material and operational standards. The famous brand in US market and APlusLift Certified Lifts are all subject to the exact same production and testing standards. To learn more about the ALI / ETL Certification Program, please visit www.autolift.org
Contact:
1-800
.616
.
9618
(phone call) or
1-425
.
300
.
2600
(text)
Free shipping to an address with forklift (or similar unloading equipment) or a freight terminal (text us for terminal locations. No additional charge when picking up at a terminal). Additional charges may apply for addresses in remote areas or high cost delivery areas. No delivery inside a building or to a backyard. No delivery inside a building or to a backyard. Text/call us for additional freight to AK, HI, PR, and Canada.
Sorry we do not provide liftgate service. The car lift package is too long to use the liftgate.
Each shipment has a tracking number. Please note that delivery time is estimated but not guaranteed.
Full Details of the Product Can Be Found on Manufacturer's Website.
All warranty and repair parts are available.
Please Note We Are The Only Seller of APlusLift Products on eBay.
Specification and Features
Heavy Duty Design:
Column Steel Thickness: 1/4"
Carriage Steel Thickness: 1/4"
Carriage Yoke Thickness: 9/16"
Arm Steel Thickness: 1/4"
Base Plate Size and Thickness: 18"L x 17 3/4"W x 13/16"H
Driving Mode: Direct Drive Hydraulic cylinders
Weight Capacity: 10,000 LB
Three Stages Arm Assembly:
Front Arm 3 Stage reach from 19 5/16" to 41 7/8"
Rear Arm 3 Stage reach from 37 5/16" to 60 3/16"
Three Sets of High extension and truck adapters included
Safety Mechanism:
Single point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life
Stiffened base plate 13/16" thickness
Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Control System:
Lifting operation by pressing "UP" button on motor
Manual lowering operation by pressing lever
Relief valve built in power pump to prevent overloading
3 sets of truck adapters included
Lifting Capacity: 10,000 LB
Overall Height without extensions: 143 3/4"
Overall Height with extensions: 166"
Overall Width: 134 5/16"
Maximum Lift height with Truck Adaptor: 78"
Maximum Lift height without Truck Adaptor: 69"
Minimum Height of Arm Top: 4"
Carriage to Carriage Width (Drive through clearance): Max 100"
Column to Column Width: 109"
Time to full rise: 50 sec
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Concrete Requirement: 6" at 3500psi reinforced with fiberglass or steel
Made In USA Anchor bolts included
Shipping Weight: 2,200 LB
Shipping package size: 142"L x 22"W x 38"H (lift) and 30"L x 17"W x 17"H (height extension kit)
Installation Manual
Policies
Shipping
We usually ship in 3 business days after payment.
All our products are shipped with tracking numbers.
For products less than 150 LB, we use FedEx or UPS shipping services.
For products over 150 LB (for example, car lifts or motorcycle lift tables), we use established LTL freight companies for freight services. It usually takes about one week to mid-west and about one and half week to east coast. Please understand that freight time is not comparable to UPS or Fedex shipping services for lifts. Lifts weights over 500 LB but FedEx and UPS shipping services accept packages up to 150 LB.
Sorry we do not ship to a P.O. Box.
Payment
We accept PayPal, credit card, or check payments.
If there is a problem with your payment, please contact us ASAP.
Technical Issues and Feedback
Customer satisfaction is most important to us.
If you have any problem with the product you received, please contact us ASAP. We will do our best to resolve your problem quickly.
We do warranty for parts only. There is no labor warranty on any products.
We ship replacement parts for free within the warranty time. Please let us know if you have any problem with parts.
If you are happy with our products, please leave us a positive feedback. We will leave a positive feedback for you in return once we receive your feedback.
Please to contact us if you want to purchase additional parts.