2 Post Car Lift 9,000 LB Capacity L2900 Auto Truck Hoist 220 Volt

Description

We have more than 20 years experience in Auto Repair produce area. We do price match all the time, that is why we can always offer our customer the best machines with the best price.
**
We ship to your confirmed address only.  You are responsible for any re-delivery charges and storage charges.  If you provide a business name, we assume you are open 8AM-5PM and can take delivery during those hours.  We are not responsible for re-delivery charges if you misrepresent being an actual business.  Any business conducted from your residence is not consider a commercial business and will be treated as a residential delivery.
FREE SHIPPING TO COMMERCIAL ADDRESS WITH UNLOAD CAPACITY.
RESIDENTIAL DELIVERY EXTRA CHARGE, Or YOU CAN PICK UP FROM LOCAL Fedex Freight TERMINAL
*Buyer must have unload equipment (i.e. forklift) available at delivery location, or you can pick up at local Fedex freight terminal.
Warranty:
12 months warranty on the parts! When you choose us, you will get the BEST warranty on eBay.
Most of the sellers don't provide or only provide warranty for those parts for 3 or 6 months, 1 year at most. Please compare with others before you make the decision. Get into our shop and you will see the details of terms and conditions, especially the best warranty!
Auto Car Lift  L
29
00
Features   220V
60HZ
1PH   3HP
MOTOR
Safety Mechanism:
come with Screw in pads. Truck adapters optional
•Double Point Safety Lock Release
•Automatic arm lock restraints
•Relief valve built in power pump to prevent overloading
•Door guards protection rubber
•Up-limit switch to protect cylinders working stroke used in safe length scope
•Heavy duty
5
/
16
"
diameter cable and
4.56
"
pulley reduce high stress on synchronization process and increase cable life
•Stiffened base plate
1
5/
32
" thickness
•Ultra high molecular self lubricating nylon slider ensures carriage smooth moving up and down
•Anchor bolts/mounting hardware included
Control System
•Lifting operation by pressing "UP" button on motor
•Manual lowering operation by pressing lever
•Relief valve built in power pump to prevent overloading
•1 sets truck adapters included
•Lifting Capacity:
9
,000 lbs
•The overall Height  11
0-1/4"
•The overall Width  13
3
-
1
/
4
"
.
Distance between two post 106-5/16"
•Column Widt
h    10.
59
"
•Base Width
18.89
"
•Column Thickness of Steel
11
/
64
"
•Carriage Thickness of Steel
3
/
16
"
•Arms Thickness of Steel
15
/
64
"
•Arm length    29-29/32"
～47-1/4"
•Min pad height: 3-
7
/8"
•Lift height max: 70 7/8"
•Drive-thru width clearance:
99-7/32
"
•Time to full rise:
20-6
0
sec
•Shipping Weight: 1
150
lbs
Site Selection
Before installing your
auto lift
, check the following:
• Lift Location: Always use architect’s plans when available.  Check layout dimension against floor plan requirements making sure adequate space is available.  Your lift
requires a 220v,  single phase, grounded electrical source.  There should be room enough to operate the lift in a safe manner and without restrictions.
• Overhead Area: The area where the lift will be located should be free of overhead obstructions such as heaters, building supports, electrical lines, doors, lights, etc.
• Floor Area: Visually inspect the site where the lift is to be installed and check for cracked or defective concrete.
Floor Requirements
• A level floor is suggested for proper installation and level lifting.  Small differences in floor slopes may be compensated for by proper shimming.  If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab.
• New concrete must be adequately cured for at least 30 days.
DO NOT
install auto lift on any asphalt surface or any surface other than concrete.
DO NOT
install auto lift on expansion seams or on cracked or defective concrete.
DO NOT
install auto lift on a second/elevated floor without first consulting building architect.
DO NOT
install auto lift outdoors unless special consideration has been made to protect the power unit from inclement weather conditions.
Concrete Specifications:
2-post lifts (under 12,000 LB. capacity):
Four (4) inches of concrete at 3000 PSI
12,000 pound two-post lifts (and higher capacity):
Six (6) inches of concrete at 3000 PSI is required.